Product Introduction:

The airflow crusher, cyclone separator, dust collector, and induced draft fan form a complete crushing system. After being filtered and dried, compressed air is sprayed into the crushing chamber at high speed through the Laval nozzle. At the intersection of multiple high-pressure airflow, the material is repeatedly collided, rubbed, and sheared to be crushed. The crushed material moves to the classification area with the upward airflow under the suction force of the fan. Under the strong centrifugal force generated by the high-speed rotating classification turbine, the coarse and fine materials are separated, and the fine particles that meet the particle size requirements are collected by the cyclone separator and dust collector through the classification wheel. The coarse particles drop to the crushing area and continue to be crushed.

Suitable for dry crushing of various materials with Mohs hardness below 9, especially for crushing high hardness, high purity, and high added value materials.

Product advantages:

The product particle size D97 is adjustable between 2-150 microns, with good particle shape and narrow particle size distribution.

Low temperature non media crushing, especially suitable for crushing materials with thermal sensitivity, low melting point, sugar content, and volatility.

The crushing process relies on the collision between the materials themselves to complete, which is different from mechanical crushing which relies on the impact of blades or hammers on the materials. Therefore, the equipment is wear-resistant and the product purity is high.

It can be used in series with multi-level classifiers to produce products with multiple particle sizes at once.

The equipment is easy to disassemble and clean, with smooth inner walls and no dead corners.

The entire system is sealed and crushed, with less dust and low noise, and the production process is clean and environmentally friendly.

The control system adopts program control, which is easy to operate.